QIACHIP Mini Wireless Remote Control Switch DC 6V 12V 24V 36V 60V 1 Channel RF Relay Latched Switch for LED Light, Car Battery, Door Lock

Price: $11.99
(as of Mar 18, 2025 20:11:09 UTC – Details)

Product Description

DC 5~60v Single Channel Controller Technical Parameters

Working Voltage : DC 5V/6V/12V/24V/36V/48V/60V

Modulation Mode:ASK

Matching Mode: Intelligent Learning Code 1527.

Quiescent Current:5mA

Maximum load power: 300W

RF Frequency: 433MHz

Wiring method: NC COM NO

Circuit Board Size: 26 * 47 * 18mm

Output: single-channel passive switch quantity output

Max Relay Contact Current : DC 20A/AC 5A

About Working Modes

Momentary: Press the remote button , the relay connects, release the remote button , the relay dis-connects.

Toggle: Press once the remote button, the relay connects , press twice the remote button , the relay dis-connects .

Latching: Press the remote button ON, the relay connects, press the remote button OFF, the relay dis-connect.

Delay Mode: Press the remote button , the output terminal of the receiver will be powered on for a certain time (5s/10s/15s/20s), and the output terminal of the receiver will be powered off.

Reset:Factory reset, this will erase all paired remotes!

Please note:We recommend using the Latching Mode, which uses one button for ON and one button for OFF. If you want to change to another mode, please follow the instructions on the product page to reset the product and select the working mode pairing.

You can configure momentary mode for access control;

You can configure latched mode for turning on/off car battery power.

Momentary mode can be applied to electric door locks!

Latched mode can be applied to on/off car batteries!

Working mode settings

1.Reset : Press the learning button on the module 8 times continuously, and the light flashes seven times and then goes out.

2.Momentary Mode:Press Module learning button 1 time, the indicator light is always on, then press the remote control button, the indicator light flashes 3 times and then turns off , then the learning is successful; If the code is not successful , the indicator lights out of the learning state after 15 seconds .

3.Toggle Mode:Press the Module Learning button 2 times, the indicator light always turns on; then press the remote control button, the indicator lights flicker three times and then off, then the learning is successful; if the code has not been successful, the indicator lamp goes out of the study state after 15 seconds.

4.Latched Mode :Press the receiver button 3 times, the receiver indicator light is always on, the receiver enters the code matching state, and then press the remote control button, the receiver indicator light flashes and then stays on, then press another button on the remote control, after the code is successful, the indicator light goes out.

5.Delay Mode : Press a certain number of times (4 times correspond to 5s/ 5 times correspond to 10s/ 6 times correspond to 15s/ 7 times correspond to 20s) to press the receiver button, the receiver indicator light is always on, the receiver enters the code matching state, then press the key of the remote controller, and the indicator light will go out after the code matching is successful.

433 Mhz universal wireless remote control switch: input voltage DC 5v-60V, working mode is superheterodyne.
Transmission distance: about 50~100m (open space), if the transmission distance is not ideal, the antenna inside the receiver box can be pulled outside through the round hole of the box, which will be more conducive to reception.Support remote control type: EV1527 learning code. Supports up to 20 remote controllers (if the remote controller is lost, buy one to pair with the PCB board.)
PCB size: 47 x 26 x 18 mm (L,W,H), output terminals: NO , NC , COM.
It supports remote and wireless control of your car battery power, garage doors, electronic doors, appliances and other remote control devices, appliances, motorcycle alarms, car sunroofs, heating systems, and more. Bring you a brand new remote control experience, please don’t miss it.
EASY TO USE: There are 4 function modes: Momentary, Toggle，Latched and Delay, please refer to the details page below for pairing.
You can configure momentary mode for access control; You can configure latched mode for turning on/off car battery power.